Engine Vibrations

Discussions and general chat

Moderator: RussDirks

iwik
Posts: 6
Joined: Mon Jan 23, 2017 6:50 am

Engine Vibrations

Postby iwik » Wed Sep 13, 2017 2:58 am

HI All,
I can't seem to detect any engine vibrations. I have tried all the profiles as supplied but nothing.
Other forces are there. I am using a Iris Dynamics Yoke.I D/l the fsforce test program and this works fine.
I see there is a folder named Iris, are the contents of this supposed to be copied over if one uses a Iris yoke.
As i have not done this.
Any help much appreciated.
Thanks
Regards
Les

RussDirks
Site Admin
Posts: 618
Joined: Sat Sep 13, 2003 1:18 pm
Location: Chilliwack, Canada

Re: Engine Vibrations

Postby RussDirks » Thu Sep 14, 2017 11:01 am

There are no engine vibrations during normal operation, except during the take-off run, but only if you have "Complex Vibs" or "Run-up vibs" selected under the Ground OPs tab of Profile Manager.

Re: the Iris subfolder: the Setup program should have already copied that in, assuming that your Iris yoke was plugged in at the time. You can check by looking in the FSForce.cfg file, at the top it should have a comment "customized for Iris Dynamics Yoke"
Russel Dirks
Forum Moderator


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest