Any aircraft suggestions for before/after testing?

Discussions and general chat

Moderator: RussDirks

Post Reply
jschall
Posts: 1
Joined: Fri Feb 27, 2004 2:18 am
Location: Saint Lambert, Qu?bec

Any aircraft suggestions for before/after testing?

Post by jschall » Fri Feb 27, 2004 2:28 am

I have downloaded the 10-session-limited demo, but before installing I would like to get a "feel" for an un-modified vs. a modified aircraft. I have seen the Marchetti SF260 suggested as one that benefits greatly from FS-Force. What about some of the stock FS9 aircraft - the DC-3 would be my preference, but I also like to fly the stock Piper J-3.

- Jeff
Jeff Schallenberg
Saint Lambert, Qu?bec
jschall@sympatico.ca

RussDirks
Site Admin
Posts: 696
Joined: Sat Sep 13, 2003 1:18 pm
Location: Chilliwack, Canada

Post by RussDirks » Fri Feb 27, 2004 6:21 am

I would recommend testing it with whatever aircraft you are the most familiar with, that way your comparisons will be the most meaningful. To a certain level, I think all aircraft benefit equally from FS Force, but personal preference will of course be a factor.

Remember you can test multiple aircraft in one session, and if you want to do a session without FS Force, remove "fsforce.dll" from the modules folder before you start MSFS. Then that session will not be counted.

Regards,
Russel Dirks
Forum Moderator

Post Reply