Fsforce and A318 aerodesing. Help please

[duque49]

Hello Russ!

how are you?, I am fine! , do you remember me when fsforce crash my FS9 and return to desktop.?, well.....now FsForce and FS9 is working all right.

In this time the problem that i have is not necesary with fsforce but i hope that you help me.

I used in my flights the airbus 318 aerodesign and the FDE is Based on Pedro Oliveira?s A320....well the problem is in the contact points or i believe that it is.

When a318 is in short final, is near to land , then before that the aircraft (with the aircraft +- 10 meters altitude ) touch the runway, in this moment with the aircraft in the air ,i feel the forces of the gears in the joystick (Microsoft Force Feedback 2).

Do you help me Russ?

thanks

[RussDirks]

When a318 is in short final, is near to land , then before that the aircraft (with the aircraft +- 10 meters altitude ) touch the runway, in this moment with the aircraft in the air ,i feel the forces of the gears in the joystick (Microsoft Force Feedback 2).

Do you mean you feel the landing impact force before you actually touch down?

When you taxi, are the wheels touching the ground?

[duque49]

Hi Russ!

Do you mean you feel the landing impact force before you actually touch down?

Yes, i feel the landing impact force before touch down .....well i think that the contact points not is correct.....or perhaps is a bug in fsforce.?


What do you think about this problem?

......
thanks

[duque49]

When you taxi, are the wheels touching the ground?

Yes when i taxi the wheels toching the ground......

[RussDirks]

You may have to edit the aircraft to adjust the contact points. Unfortunately I don't know too much about that, so I can't be of much help.