Realair Duke v2 P3D

Discussions and general chat

Moderator: RussDirks

Post Reply
Terrydew
Posts: 16
Joined: Mon Mar 09, 2015 9:52 am

Realair Duke v2 P3D

Post by Terrydew » Wed May 27, 2015 9:01 pm

I just purchased this aircraft and in reading the manual it said it correctly models the trim tab and elevator forces. Is there away to try thes out with FS Force! I assume if I select FSX for trim control in FS Force manager, I would get the standard fsx and not the Realair version? Can FS Force see the Realair trim?

RussDirks
Site Admin
Posts: 696
Joined: Sat Sep 13, 2003 1:18 pm
Location: Chilliwack, Canada

Re: Realair Duke v2 P3D

Post by RussDirks » Thu May 28, 2015 12:06 am

Are you sure that's not just marketing <you-know-what>? Post the section from the manual here so I can read it.
Russel Dirks
Forum Moderator

Terrydew
Posts: 16
Joined: Mon Mar 09, 2015 9:52 am

Re: Realair Duke v2 P3D

Post by Terrydew » Thu May 28, 2015 5:14 am

This is what I read from the flying manual.


When you add up trim, not only does the elevator trim-tab move down, the elevators deflect
upwards and the control yokes moves aft. This effect is speed sensitive just like in real life - for
example at standstill you’ll see no control surface or yoke movement, only the trimtab will move.
The ailerons and rudder respond in the same way.

Post Reply